Kia Stinger CK: Lighting / Headlight leveling device
Kia Stinger (CK) 2018-2023 Owner's Manual / Features of your vehicle / Lighting / Headlight leveling device
Contents:
Automatic type
To ensure the proper headlight beam is used under various conditions, the headlight beam levels are automatically adjusted depending on the number of passengers, the weight in the liftgate, and other driving conditions.
✽ NOTICE
If it does not work properly even though your car is inclined backward according to passenger's posture, or the headlight beam is irradiated to the high or low position, have the system be inspected by an authorized Kia dealer. Do not attempt to inspect or replace the wiring yourself.
Other information:
Kia Stinger (CK) 2018-2023 Owner's Manual: Wheel
Repair procedures Hub nut tightening sequence Tighten the hub nuts as follows. Tightening torque: 107.9 - 127.5 N·m (11.0 - 13.0 kgf·m, 79.6 - 94.0 lb·ft) When using an impact gun, final tightening torque should be checked using a torque wrench.Kia Stinger (CK) 2018-2023 Owner's Manual: Console Temperature Control Actuator
Repair procedures Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected to terminal 3 and ground to terminal 7. Verify that the mode control actuator operates to the vent mode when connected in reverse.Categories
- Manuals Home
- Kia Stinger Owners Manual
- Kia Stinger Service Manual
- New on site
- Most important about car
Contents
Copyright © 2026 www.kstinger.com 0.0074