Kia Stinger: Lighting / Headlight leveling device
Automatic type
To ensure the proper headlight beam is used under various conditions, the headlight
beam levels are automatically adjusted depending on the number of passengers, the
weight in the liftgate, and other driving conditions.
✽ NOTICE
If it does not work properly even though your car is inclined backward according
to passenger's posture, or the headlight beam is irradiated to the high or low position,
have the system be inspected by an authorized Kia dealer. Do not attempt to inspect
or replace the wiring yourself.
This warning message illuminates if there is a malfunction (burned-out bulb except
LED lamp or circuit malfunction) with the headlamp. In this case, have your vehicle
inspected by an authorized ...
Dynamic Bending Light (DBL) uses the steering angle and vehicle speed, to keep
your field of vision wide by swiveling and leveling the headlamp.
Change the switch to the AUTO position when the en ...
Other information:
Repair procedures
Replacement
1.
Using a clip remover, detach the clips, and remove the hood insulator
pad (A).
Be careful not to scratch the hood panel.
...
The driver must be cautious in the following situations because the system is
limited when recognition of the lane marker is poor or limited:
►When lane and road condition is poor
- It is difficult to distinguish the lane marker from road when the lane marker
is covered with dust or sand.
- ...