Kia Stinger: Light bulb position (Side) / License plate lamp (LED type) bulb replacement
If the license plate lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the license plate lamp (LED), for
it may damage related parts of the vehicle.
If the high mounted stop lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of a ...
If the side repeater lamp (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an in ...
Other information:
Repair procedures
Replacement
1.
Loosen the front door checker (A) mounting bolt.
Tightening torque :
19.6 - 29.4 N·m (2.0 - 3.0 Kgf·m, 14.5 - 21.7 lb·ft)
2.
Detach the clips, then remove the ...
Always observe the following:
Check tire pressure when the tires are cold. (After vehicle has been parked
for at least three hours or hasn't been driven more than 1.6 km (one mile) since
startup.)
Check the pressure of your spare tire each time you check the pressure of
other tires.
...