Kia Stinger: Light bulb position (Side) / Stop and tail lamp (LED type) bulb replacement

If the stop and tail lamp (LED) (1, 2) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an integrated unit. The LED lamps have to be replaced with the unit.
A skilled technician should check or repair the stop and tail lamp (LED), for
it may damage related parts of the vehicle.
■ Head lamp - Type A
1. Remove the service cover clip on the wheel housing.
2. Remove the headlamp bulb cover by turning it counterclockwise.
3. Disconnect the headlamp bulb socket-connecto ...
If the rear side marker (LED) (1) does not operate, have the vehicle checked
by an authorized Kia dealer.
The LED lamps cannot be replaced as a single component because they are part
of an inte ...
Other information:
Components and components location
Components
Repair procedures
Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
...
If there is a problem with the system a message will appear. If the problem continues
the LKA system fail indicator will illuminate.
LKA system fail indicator
The LKA system fail indicator (yellow) will illuminate with an audible warning
if the LKA system is not working properly. In this cas ...