Kia Stinger: Towing / Removable towing hook
1. Open the liftgate, and remove the towing hook from the tool case.
2. Remove the hole cover pressing the right side part or lower part of the cover
on the bumper.
3. Install the towing hook by turning it clockwise into the hole until it is
fully secured.
4. Remove the towing hook and install the cover after use.
If emergency towing is necessary, we recommend having it done by an authorized
Kia dealer or a commercial tow-truck service. Proper lifting and towing procedures
are necessary to prevent damage ...
■ Front
■ Rear
If towing is necessary, have it done by an authorized Kia dealer or a commercial
tow truck service.
If towing service is not available in an emergency, your vehicle may be ...
Other information:
Components and components location
Components
Schematic diagrams
Schematic Diagrams
Description and operation
Description
AFS Unit (ECU)
AFS located in Cockpit Module is provided information of vehicle (steering wheel
signal, vehicle speed, inclin ...
Follow either of these procedures:
Move the lever down (to SET-) and hold it. Your vehicle will gradually slow
down. Release the lever at the speed you want to maintain.
Move the lever down (to SET-) and release it immediately. The cruising speed
will decrease by 1 km/h (1.0 mph) each ...