Kia Stinger: Restraint / Specifications

Kia Stinger CK 2018-2025 Service Manual / Restraint / Specifications

Service data

Specification

Item	Resistance (Ω)
Driver Airbag (DAB)	1.7 - 2.3
Passenger Airbag (PAB)	1.7 - 2.3
Side Airbag (SAB)	1.8 - 2.4
Curtain Airbag (CAB)	1.7 - 2.3
Seat Belt Pretensioner (BPT)	1.7 - 2.3
Seat Belt Buckle Switch (BS)	1.7 - 2.3
Emergency Fastening Device (EFD)	1.7 - 2.3

Tightening torque

Tightening Torques

Item	N·m	kgf·m	lb·ft
Passenger airbag (PAB)	3.8 - 5.8	0.39 - 0.6	2.8 - 4.3
Curtain airbag (CAB) bolt	7.7 - 11.7	0.79 - 1.2	5.7 - 8.6
Curtain airbag (CAB) nut	3.8 - 5.8	0.39 - 0.6	2.8 - 4.3
Side airbag (SAB)	5.8 - 7.8	0.6 - 0.8	4.3 - 5.7
Knee airbag (KAB)	7.8 - 11.7	0.8 - 1.2	5.7 - 8.6
Seat belt anchor bolt (BPT)	39.2 - 53.9	4.0 - 5.5	28.9 - 39.7
Emergency Fastening Device (EFD)	39.2 - 53.9	4.0 - 5.5	28.9 - 39.7
SRS control module (SRSCM)	9.4 - 13.5	0.96 - 1.38	6.9 - 9.9
Front impact sensor (FIS)	7.8 - 11.7	0.8 - 1.2	5.7 - 8.6
Pressure side impact sensor (P-SIS)	7.8 - 11.7	0.8 - 1.2	5.7 - 8.6
Gravity side impact sensor (G-SIS)	2.9 - 3.9	0.3 - 0.4	2.1 - 2.8
Rear Gravity side impact sensor (R-SIS)	7.8 - 11.7	0.8 - 1.2	5.7 - 8.6

Restraint

General information General The supplemental restraint system (SRS) is designed to supplement the seat belt to help reduce the risk or severity of injury to the driver and passenger by ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Brake/Clutch Fluid

Repair procedures Inspection Check the brake fluid level in the brake fluid reservoir. The level should be between “MIN” and “MAX” marks on the side of the reservoir. Use only hydraulic brake fluid conforming to DOT 3 or DOT 4 specification. Check the brake system fo ...

Kia Stinger CK 2018-2025 Service Manual: Automatic Transmission Control System

Description and operation Description Automatic transmission control system relies on various measurements to determine the current control status and determine the necessary compensation values. These values are used to control the actuators and achieve the desired control output. ...