Kia Stinger: Specifications & Consumer information / Tire specification and pressure label, Engine number

Kia Stinger CK 2018-2025 Owners Manual / Specifications & Consumer information / Tire specification and pressure label, Engine number

Tire specification and pressure label

The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.

The tire label located on the driver's side center pillar gives the tire pressures recommended for your vehicle.

Engine number

■ Gasoline engine (Theta II 2.0L T-GDI)

■ Gasoline engine (Lambda II PE 3.3L T-GDI)

The engine number is stamped on the engine block as shown in the drawing.

Vehicle Identification Number (VIN), Vehicle certification label
Vehicle Identification Number (VIN) ■ Frame number The vehicle identification number (VIN) is the number used in registering your vehicle and in all legal matters pertaining to its ownership, ...

Kia Stinger CK 2018-2025 Service Manual
...

Other information:

Kia Stinger CK 2018-2025 Service Manual: BJ Boot


Repair procedures Replacement 1. Remove the front driveshaft. (Refer to Driveshaft Assembly - “Front Driveshaft”) 2. Remove the TJ joint assembly. (Refer to Driveshaft Assembly - “TJ Joint”) 3. Using a plie ...

Kia Stinger CK 2018-2025 Service Manual: Spark Plug


Repair procedures Inspection [On vehicle inspection] 1. Accelerate the engine to about 3,000 rpm 3 times or more. 2. Remove the spark plug. 3. Check the spark plug visually. If the electrode is dry, the spa ...

Copyright © www.kstinger.com 2015-2025