Kia Stinger: Features of your vehicle / 360° camera monitoring system
The 360° camera monitoring system is not a substitute for proper and safe parking
procedures. The 360° camera monitoring system may not detect every object surrounding
the vehicle. Always drive safely and use caution when parking.
The 360° camera monitoring system can assist in parking by allowing the driver
to see around the vehicle. Push the button into the [ON] position to operate the
system.
To cancel the system, push the button again.
Operating conditions
- When the Engine Start/Stop Button is ON position
- When the transaxle is on D, N or R
- When the vehicle moves backwards, regardless of On/Off of button and vehicle
speed, the 360° camera monitoring system is operated.
- When the liftgate and driver/passenger door are opened and the outside mirror
is folded, the warning is illuminated in the 360° camera monitoring system.
- If the 360° camera monitoring system is not operating normally, the system
should be checked by an authorized Kia dealer.
WARNING
This system is a supplemental system only. It is the responsibility of the
driver to always check the area around the vehicle before and while moving.
The rear view monitor will activate with the ignition switch ON, engine ON and
the shift lever in the R (Reverse) position. This system is a supplemental system
that shows the area behind the ve ...
Battery saver function
The purpose of this feature is to prevent the battery from being discharged
if the lights are left in the ON position. The system automatically shuts off
the parking l ...
Other information:
Repair procedures
Refilling And Bleeding
Never remove the radiator cap when the engine is hot. Serious scalding
could be caused by hot fluid under high pressure escaping from the radiator.
...
Repair procedures
Replacement
Put on gloves to protect your hands.
•
Use a plastic panel removal tool to remov ...