Kia Stinger: Driveshaft and axle / Differential Carrier Assembly

Kia Stinger CK 2018-2025 Service Manual / Driveshaft and axle / Differential Carrier Assembly

Front Propeller Shaft
Repair procedures Removal 1. Raise the vehicle, and make sure it is securely supported. 2. Remove the engine room side cover. D 2.2 R VGT (Refer ...

Rear Differential Carrier
Components and components location Component 1. Drain plug 2. Differential case 3. Differential cover 4. Pinion drive gear 5. Pinion drive gear adjustment sh ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Console ON/OFF Actuator


Repair procedures Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected to terminal 3 a ...

Kia Stinger CK 2018-2025 Service Manual: In-car Sensor (DATC only)


Description and operation Description The In-car air temperature sensor is built in the heater & A/C control unit. The sensor consists of a thermistor that measures the inside temperature. The signal decided by the resistance value that changes in accordance with perceived i ...

Copyright © www.kstinger.com 2015-2025