Kia Stinger: Heating, Ventilation And Air Conditioning

Kia Stinger CK 2018-2025 Service Manual / Heating, Ventilation And Air Conditioning

Special service tools

Special Service Tools

Tool (Number and name)	Illustration	Use
09977-3R000 Disc & hub assembly bolt remover		Removal and installation of disc & hub assembly.

Troubleshooting

Problem Symptoms Table

Before replacing or repairing air conditioning components, first determine if the malfunction is due to lack of refrigerant, air flow or compressor.

Use the following table to find the cause of the problem. The numbers indicate the order of the likely cause of the problem. Check each part in order. If necessary, replace the corresponding parts.

After fixing the area of malfunction, check the complete system to ensure satisfactory performance.

Standard:

Symptom	Suspected Area
No blower operation	1. Blower fuse
	2. Blower relay
	3. Blower motor
	4. Power mosfet
	5. Blower speed control switch
	6. Wire harness
No air temperature control	1. Engine coolant capacity
	2. Heater control assembly
	3. Temperature control actuator
No compressor operation	1. Refrigerant capacity
	2. A/C fuse
	3. Pulley assembly limiter
	4. Compressor
	5. A/C pressure transducer
	6. A/C switch
	7. Evaporator temperature sensor
	8. Wire harness
Vented air not cold	1. Refrigerant capacity
	2. Refrigerant pressure
	3. Drive belt
	4. Pulley assembly limiter
	5. Compressor
	6. A/C pressure transducer
	7. Evaporator temperature sensor
	8. A/C switch
	9. Heater control assembly
	10. Wire harness
Insufficient cooling	1. Refrigerant capacity
	2. Drive belt
	3. Pulley assembly limiter
	4. Compressor
	5. Condenser
	6. Expansion valve
	7. Evaporator
	8. Refrigerant lines
	9. A/C pressure transducer
	10. Heater control assembly
No engine idle-up when A/C switch ON	1. Engine ECM
No engine idle-up when A/C switch ON	2. Wire harness
No air inlet control	1. Heater control assembly
No mode control	1. Heater control assembly
No mode control	2. Mode actuator
No cooling fan operation	1. Cooling fan fuse
	2. Fan motor
	3. Engine ECM
	4. Wire harness

Blower

Controller

Heater

Wireless Power Charging (WPC) Lamp

Components and positions Components Repair procedures Removal • Handling ...

Specifications

Service data Service data Air Conditioner Item Specification Compressor Type 7HV x 17 Oil type & ...

Other information:

Kia Stinger CK 2018-2025 Service Manual: Inhibitor Switch

Specifications Specifications Item Specification Output type PWM Power supply (V) 5 Components and components location Components Location 1. Inhibitor switch ...

Kia Stinger CK 2018-2025 Owners Manual: Speed setting (Smart cruise control system)

To set Smart Cruise Control Speed 1. Press the CRUISE button, to turn the system on. The CRUISE indicator in the instrument cluster will illuminate. 2. Accelerate to the desired speed. 30 km/h (20 mph) ~ 200 km/h (120 mph) : when there is no vehicle in front 0 km/h (0 mph) ~ 200 km/h (12 ...